Instruction Manual
3-Wheel Combination Lock (DW)
____________________________________________________________________________________
____________________________________________________________________________________
Version 2.0: 3/12/2018
Page |
2
STEP 2: Insert change key into the key hole (Back of door)
1.
Insert L-Shape key into key hole *(Refer to diagram 1.0 marked
“
A
”
with
arrow pointing down)
2.
Insert L-Shape Key
completely pointing downwards
*(Refer to
diagram 1.0 marked
“
X
”
shown maximum point of insertion)
3.
Turn Change Key
anti-clockwise
↺
(Right) 90 degrees
STEP 3 :Insert new numbers (e.g. 30-40-50) on setting/resetting line
1.
Turn
anti-clockwise
↺
(Left)
4 times (30) or (your 1
st
number),
stopping when (30) is aligned with the setting/resetting line the fourth time
2.
Turn
clockwise
↻
(Right)
3 times (40) or (your 2nd number), stopping when (40) is aligned with the
setting/resetting line the third time
3.
Turn
anti-clockwise
↺
(Left)
2 times (50) or (your 3rd number), stopping when (50) is aligned with the
setting/resetting line the second time
4.
Stop at last number on
setting / resetting line (* Note that last number must be above 20)
5.
Turn change key
clockwise
↻
(Left)
90 degrees and pull out
6.
Changing of combination lock is completed
NOTE: DO NOT TURN BACK TO REGAIN PROPER ALIGNMENT IF EXCEEDED NUMBER. REPEAT
PROCESS FROM BEGINNING OF STEP 3
IMPORTANT !!:
Please check using new numbers on opening line repeatedly before locking
For support contact us or our local distributor/ agent
For additional support please visit :
Website
:
Youtube : Moem Malaysia
