Instruction Manual
3-Wheel Combination Lock (DW)
____________________________________________________________________________________
____________________________________________________________________________________
Version 2.0: 3/12/2018
Page |
1
NOTE: READ COMPLETE INSTRUCTIONS BEFORE OPERATING THE LOCK OR CHANGING THE COMBINATION
Important:
Turn dial slowly and evenly. Do not turn back to regain alignment if you rotate past number. If an error is made, clear
and re-dial entire combination. Do not count turns. Count how many times each number is aligned with the opening index (at the 12
o'cloc
k position). Always view dial and ring straight on, not at an angle. It is the owners’ responsibility to maintain the code.
TO OPEN (Factory setting 10-20-30)
1.
Turn
anti-clockwis
e ↺
(Left)
4 times (10) or (your 1
st
number),
stopping when (10) is aligned with the opening line the fourth time
2.
Turn
clockwise
↻
(Right)
3 times (20) or (your 2nd number), stopping
when (20) is aligned with the opening line the third time
3.
Turn
anti-clockwise
↺
(Left)
2 times (30) or (your 3rd number),
stopping when (30) is aligned with the opening line the second time
4.
Turn
clockwise
↻
until stop
(If correctly done, number should stop at zero on the opening line)
CHANGING TO A NEW COMBINATION
NOTE:
With door in opening position, turn handle so that bolts in a shooting position
STEP 1:Insert existing numbers (e.g. 10-20-30) on setting/resetting line
1.
Turn
anti-clockwis
↺
(Left)
4 times (10) or (your 1
st
number), stopping when (10) is aligned with the
setting / resetting line the fourth time
2.
Turn
clockwise
↻
(Right)
3 times (20) or (your 2nd number), stopping when (20) is aligned with the
setting/ resetting line the third time
3.
Turn
anti-clockwise
↺
(Left)
2 times (30) or (your 3rd number), stopping when (30) is aligned with the
setting/resetting line the second time
4.
At last number, hold the combination dial lock
NOTE: If the number is inserted correctly, you will be able to insert change key (STEP 2)
