Mody Pumps MSVSS, Operating Instructions - Installation Maintenance

Page: 4 / 40

GENERAL INFORMATION
MODY NON-CLOG VORTEX SS SLUDGE PUMPS have basically been designed and
manufactured with the highest quality components and used as heavy-duty
dewatering/wastewater units to pump out flooded installations or any other conditions that
need removal of solids laden unwanted fluids. The pumps are capable of handling water
contaminated with oil as well as stringy solids normally associated with raw and sewage
water with pH levels ranging from 3 - 10.
TECHNICAL DESCRIPTION
MOTOR
•
2Pole, 1 and 3 Phase continuous rated squirrel cage induction motor.
•
Stator insulation class H 180ºC, rated IP68
•
Speed: 3450RPM @60 Hz
•
Power rating: 0.5 to 10HP @ 60Hz
•
In-built Circle Thermal protection.
•
Max. Start/stop per hour 15
•
Service factor: 1.15
•
Max. fluid temperature 104F/40C
POWER SUPPLY AC 1 phase, 60 Hz, 120V, 240V, and 3 phase, 240/480V
STARTING
METHOD
Plug-in, Float, DOL
OUTLET/
DISCHARGE
2”, 3”,4” NPT/Flange
PUMP ROTOR
SHAFT Rugged aluminum die cast rotor dynamically balanced with a 410 duplex Stainless-
Steel shaft.
BEARINGS Two single row deep groove Ball Bearings for Radial and thrust loads.
SEALS
Double SC/SC and Carbon/Ceramic mechanical seals enclosed in pressure
compensated oil chamber.
IMPELLER Vortex 316SS
FRAME AND
OUTER CASE
316 stainless steel.
HARDWARE 316 Stainless steel
POWER CABLE
•
Waterproof/ oilproof, rubber-insulated, neoprene- sheathed cooper conductor
flexible cable.
•
UL SJTW/STOW, 50ft 4 core. (Optional Cable Lengths Available)
VOLUTE
•
316 Stainless Steel. Spherical solids handling 1.5” (38mm) & 2” (50mm).
SUBMERGENCE MIN: 2”, MAX: 65’ (20m). (Below liquid surface)
ORINGS/
ELASTOMERS
FKM - VITON.
LIQUID DATA Temp.: 104 ° F (40 ° C); pH Range 3 – 11; Specific Gravity: 1.1 Max
OPTIONAL GUIDE RAIL SYSTEM