ModWright Instruments KWI 200, Owner'S Manual

Page: 6 / 11

6
Front Control and Displays:

Left control knob rotates freely. Turning knob in clock-wise direction will toggle
through available inputs

Left button is power. Depressing button will power unit on or off. Unit may also be
powered on or off via remote control power button.

Right button is HT/BP (Home Theater Bypass – Also acts as preamp input). When this
button is pressed, input display will read ‘bp’ for ‘bypass’ and volume display will read
‘--‘ This will bypass the preamp section of the Integrated Amp and feed whatever source
is connected to HT/BP RCA inputs, straight to the amplifier, with NO ATTENUATION
OR VOLUME CONTROL
. IT IS RECOMMENDED THAT THE HT/BP INPUT
ONLY BE CONNECTED TO A SEPARATE PREAMP OR A
PREAMP/PROCESSOR FOR HOME THEATER USE
.

Right control knob rotates freely. Turning knob in clock-wise rotation will increase
volume from mute = ‘- -‘, numerically from 01 – 99. Remote control may also be used to
adjust volume. Volume level is only displayed on digital display.

Left digital display will indicate inputs as: CD, L1, L2, L3, (P1, P2 if phono option
installed), (D1, D2 if DAC option installed) and ‘bp’ when HT/BP button is depressed.
In fault mode, left digitital display will read ‘00’ and right display will read ‘P5’.

Right digital display indicates volume level

MWI logo in center will be lit blue when unit is turn on and in operation. If displays are
dimmed or turned off, logo will remain lit. It may not be turned off.

Digital displays may be dimmed from bright to off, by depressing the ‘*’ button on the
remote. Each time button is depressed, displays dim to lower level until they are turned
off. When displays are turned off, they will light up for approximately 7 seconds
whenever any controls are adjusted or remote functions activated.