MOD-5824 QUEEN BED
Customer Service 908-368-1025︱www.modway.com
Page 4 of 5
STEP 5:
1.
Attach each
Center Support Leg (5)
to
Center Rail (4)
by using 2 pieces of
Bolts(E)
, 2 pieces of
Lock
Washers(G)
and 2 pieces of
Flat Washers(F)
. Tighten Bolt by using
Allen Wrench (I)
fully as shown.
2. Attach the assembled
Center Rail (4) & Center Support Leg (5)
to the
Headboard (1) & Footboard (3)
by using 4 pieces of
Bolts (E)
, 4 pieces of
Lock Washers (G)
and 4 pieces of
Flat Washers (F)
. Tighten
Bolt by using
Allen Wrench (I)
fully as shown.
3. Please note the bottom of each
Center Support Leg (5)
has the adjustable foot glide which you can
adjust the height if necessary.
STEP 6:
Insert 2 pieces of
Side Plastic Cover (7)
into each end of 2 pieces of
Slats (8)
as shown.
Insert the other end of the
Slats (8)
into 1 piece of
Center Plastic Cover (6)
as shown.
Insert the assembled
Side Plastic Covers (7)
into the corresponding holes on the
Slat Support (12)
of the
Bed
Rail (2)
, and the assembled
Center Plastic Cover (6)
into the corresponding holes on
Center Rail (4)
as shown.
Repeat the same steps for the remaining 24 pieces of
Slats (8)
.
5
2
5
E
x 10
x 10
F
x 10
G
I
x 1
