MOD-5808 /MOD-5812 QUEEN BED
Customer Service 908-368-1025︱www.modway.com
Page 3 of 4
STEP 3:
1. Attach the
Center support leg (5)
to
Center rail (4)
by using 6 pieces of
Bolts (C)
, 6 pieces of
Lock
washers (E)
and 6 pieces of
Flat washers (D)
. Tighten all
Bolts (C)
by using
Allen wrench (F)
as shown
in Figure 1. Pls note there are adjustable foot glide on the bottom of
Center support leg (5)
and you can
adjust the height if necessary.
2. Attach the assembled
Center rail (4)
and
Center support leg(5)
to Headboard &Footboard by using 4
pieces of
Bolts (C)
, 4 pieces of
Lock washers (E)
and 4 pieces of
Flat washers (D)
. Tighten
Bolts(C)
by
using
Allen wrench (F)
as shown in Figure 2.
STEP 4:
Insert 2 pieces of
Side Plastic Cover (7)
into each end of 2 pieces of
Slats (8)
as shown.
Insert the other end of the
Slats (8)
into 1 piece of
Center Plastic Cover (6)
as shown.
Insert the assembled
Side Plastic Covers (7)
into the corresponding holes on the
Slat support of the
Bed rail (2)
, and
the assembled
Center Plastic Cover (6)
into the corresponding holes on
Center Rail (4)
as shown.
Repeat the same steps for the remaining 24 pieces of
Slats (8)
.
C
x 10
x 10
E
x 10
D
F
x 1
8
7
6
7
1
3
4
2
4