Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 4 of 6
A or Bx4
Cx8
Fx1
Ex4
Dx4
STEP 1:
Line up the
Bed Frame (2)
board’s pre-drilled holes to mat ch those of the
Headboard (1)
.
Secure the
Headboard (1)
to the
Bed Frame (2)
by using 2 pieces of
Bolt (B)
for the thicker
Bed Frame (2
), and 2 pieces
of
Bolt (A)
for the thinner
Bed Frame (2).
Before inserting each bolt, place 1 piece of
Spring Washer (D)
and
Flat
Washer (C)
on each bolt. Then fit 1 piece of
Flat
Washer (C)
on the bolt as it protrudes through the other side of the
Bed Frame (2).
Place 1 piece of
Hex Nut (E)
after the
Flat Washer (C)
at the end of each bolt. Then tighten the
Bolts (A or B)
by
using the
Allen Wrench (F).
Repeat the same procedure for each bolt and each side of the
Bed Frame (2).
Hardware & Tool required
STEP 2:
2
Assembly is completed. The bed is ready to use now!
NOTE:
Hardware may loosen over time. Periodically check that all connections are tight.
Carefully position the assembled bed to the desired location by four adults.
1
Note:
Extra hardware were provided for attaching the headboard to your Bed Frame (use is optional).
1
2
F
E
C
AorB
C
D
MODWAY
CONNECTING HEADBOARD TO BED FRAME
D
C
AorB
1.
2.
