Customer Service 908-368-1025
︱
︱
︱
︱
www.modwayfurniture.com Page 2 of 3
EEI -1205
DINING TABLE
Ax4
Dx1
STEP 2:
Hardware & Tool required
Please put the legs (2) upside down as shown.
Insert 2 sets of Hex Head Bolt with Spring Washer and Flat Washer (A) into the pre-drilled holes on the Bottom Rails (3)
through the pre-drilled holes on the Leg (2) as shown.
Use Open Wrench (D) to tighten the 2 sets of Hex Head Bolt with Spring Washer and Flat Washer (A) clockwise until secure
.
Repeat the same steps for affixing the other Leg (2).
Dx1
Tool required
Loosen the
2 sets of Hex Head Bolts with Spring Washers and Flat Washers (A) which come pre-installed at the end of
Bottom Rail (3) by using Open Wrench (D) as shown.
Repeat the same steps for loosening the other Bottom Rail (3).
STEP 1:
2
2
3
3
3
