EEI-3147 DINING TABLE
Customer Service 609-256-9000︱www.modway.com
Page 2 of 4
STEP 1:
1. Please remove the plastic cover as shown with Figure 1.
2. Please insert
Handle (2)
into
Leg (1)
by the convex slot as shown with Figure 2.
3. Use
Allen Wrench (F
) to tighten
Bolts (B)
and
Small Flat Washer (C)
clockwise as shown with Figure 3.
4.
Repeat the same way to assemble the handle on the other side
STEP 2:
1. Please insert 1 piece of
Bottom Support (5)
into
the pre-drilled holes on one side of
Leg (1)
with 1 piece of
Big
Flat Washer (D)
as
shown with Figure 2.
2. Please insert 2 pieces of
Upper Rails (4)
into
the pre-drilled holes on one side of
Leg (1)
by the convex slot as
shown with Figure 1.
3. Repeat the same way to assemble the
Upper Rails (4)
and
Bottom Support (5)
on the other side of
Leg (1)
.
