Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 2
EEI-2252
BENCH
STEP 1:
Please put the
Bench Top (1)
upside down on a carpeted or padded area.
Remove the plastic covers which pre-install in the end of the
Bench Top (1)
by using
Allen Wrench (C)
.
Insert 1 piece of
Leg (2)
into
Bench Top (1)
as shown.
Insert 2 pieces of
Bolt (B)
from the pre-drilled holes on the bottom of the
Bench Top (1)
into
each side on the bottom of
Leg (2)
.
Insert 2 pieces of
Bolt (A)
from the pre-drilled holes on the side rail of the
Bench Top (1)
into
each end of
Leg (2)
as shown.
Do not fully tighten
Bolts (A&B)
at this step.
Repeat the same steps for the remaining 1 piece of
Leg (2).
Use
Allen Wrench (C)
to tighten all
Bolts (A&B)
clockwise until secure
.
Ax4
Bx4
Cx1
Hardware & Tool required
STEP 2:
Assembly is completed. The bench is ready to enjoy now!
Carefully turn over the assembled bench.
A
2
B
C
C
2
1
2
1
2
1
B
A