Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 3
EEI –1400/1401
CLUB CHAIR
STEP 1:
STEP 2:
Insert 1 piece of
Front Leg (3)
into the upper hole on bottom of the
Chair Back (1)
as shown.
Attach by 2 pieces of
Bolt (B),
2 pieces of
Spring Washer (C)
and 2 pieces of
Flat Washer (D
) as shown.
Repeat the same steps for the remaining
Front Leg (4).
Do not fully tighten
Bolts (B)
for either leg.
2
Ax5
Cx5
Dx5
Hardware & Tool required
A
C
D
Bx4
Dx4
Cx4
Hardware & Tool required
1
3
C
D
B
1
3
Please put
Chair Back (1)
upside down on a carpeted or padded area.
Then open the black fabric which attached by the Velcro from back to front on the bottom of
Seat Frame (2)
. The inside of
the
Seat Frame(2)
will now be visible
.
Attach the
Seat Frame (2)
to the
Chair Back(1)
by using 5 pieces of
Bolt (A),
5 pieces of
Spring Washer (C)
and 5 pieces
of
Flat Washer (D)
as shown.
Do not fully tighten
Bolts (A)
at this step.
2
