1-20-6 BF1 Ebisuminami,Shibuya-ku,
Tokyo,150-0022,Japan
Tel : 81-3-5768-3681
1-8-30-1 Daimyou,Chuou-ku
Fukuoka,810-0041,Japan
Tel : 81-92-732-4211
TOKYO
FUKUOKA
To install ModuleX safety
MMP-060S/5H/1E/10A/Z12
Installation Guide Lighting Fixture
R
Tracklight
4-1-21 Kitahama, Chuo-ku, Osaka,
532-0011,Japan
Tel : 81-6-7167-2474
OSAKA
1
Installation Details
Installation Diagram
Caution
1
2
3
4
5
Pull out the hood from the body.
Put a filter in hood.
Turn around the option holder,
and put in.
Please attention that
Donʼt put in the filters than
the rule number of pieces.
Causes of falling and damage.
Align the markings of the hood
and the body, please turn it
clockwise until it clicks.
the sharpener lens is counted
two pieces of filter lenses.
Turn around the hood.
Turn around the option holder,
and put out .
OPTION
HOLDER
UP to
2FILTERS
FILTER
f
f
Optional parts installation
Body
Hood
Sharpner
lens
Sharpner
lens
OPTION
HOLDER
UP to 2FILTERS
cut
To rotate the holder,
please wear a flat head
screwdriver at the cut.
d
d
1
2
4
3
5
Tilting angle setting
Please loose a screw by the
hexagonal wrench,and unrock.
Please regulate a point of view
to a scale.
Please use an attached hexagon
wrench by all means.
Tilt lock
Pan lock
Installation Details
Installation Diagram
Caution
e
Do not install on walls and floor.
Attaching luminaire to track
e
1
2
3
4
5
1
Lower the cover of the power
supply box
Turn the lever to the left
(turn off the power)
Insert luminaire into track
Turn the lever to the right
(turn on the power)
Raise the cover of the power supply
box
×wall
×floor
1
2
5
lighting track
Lever position indication
Insert the luminaire surely into
the track.
There is a danger of falling
if there is incompleteness.
Turn lever securely to the "ON"
position.
Failure to do so may
cause a fall or fire.
10°
90°
380°
lever
lever
If you can not raise the cover,
there is a possibility that
the luminaire is not securely fixed.
Please try installing again.
cover
4
Adjustment of irradiation direction
Grasp the fixture and adjust
the irradiation direction
Do not forcibly move beyond
the movable range
Please adjust the fixture after
turning off the power and
cooling the fixture
Range of movement
Connect with only N1 and L1 recommended.
The terminals are connected internally
as shown in the right circuit diagram.
×
×
FOR USE WITH EUTRAC CORP, Series 230,233 TRACK SYSTEM ONLY.
Lighting track is sold separately.
This fixture is compatible with Eutrac 2-circuit track only.
The fixture attaches to both the left and right circuit rails
of the track.Please ensure that only ONE power feed is
supplied to the track.
N1
N2
L1
L2
N2
L2
N1
L1
