www
www.modster.at
15
User Manual
Calibration
When in Balance Mode, if the M1 moves forward or backward on its own on flat ground, it
needs to be calibrated if the problem persists, please contact after-sales service.
To Calibrate the M1
Confirm that the hoverboard is in the off state and keep both side of the pedals parallel
to the horizontal plane. Make sure the hoverboard is turned off, press and hold the power
switch for 5 seconds and then release it. When you hear a sound, the system starts to
calibrate;
the red light (that is, the running indicator and the left turn indicator) flashes 3 times. Wait
until the red light is on, the system calibration is configured. Turn it off and on again and
you can use the hoverboard again
Self-balance Mode
Place the car horizontally-make sure the M1 is turned on,press the power switch for about 6
seconds, until you hear the beep, then restart the hoverboard. The adjustment is complete.
Child mode/ Adult mode
Stand the M1 up on its side. Press the power button to turn it on -release the button -then
keep it pressed for about 6 seconds until the beep is heard and the hoverboard is restarted.
Perform the same action to switch back to original mode.
Alarms
Overheating Riding for an extended period of time could increase the internal temperature
of your M1 in excess of 122°F(S0° C). lf this happens, the glow lights will flash red, an alarm
will sound and your M1 will not be able to charge. Simply step off the hoverboard, power it
off, and give it time to cool back down to a normal operating temperature
Other alarms
For any other alarms, try restarting your M1 . lf the problem persists, please contact
after-sales service.
10 Calibration and Alarms
MODSTER M1
