MODSTER SC R1, User Manual

Page: 21 / 22

User Manual MODSTER SC R1
21 www.modster.at
• The maximum total weight and load must not be exceeded. High loads in connection with overloading
operation of the device can lead to structural damage. Jumping with the device is not allowed and
leads to loss of warranty, as well as driving through potholes and the like. Driving on cobblestones
leads to increased wear!
• Only one person is allowed to drive at the same time
• The device is designed for operation on flat, smooth surfaces. It must not be used on sandy, muddy,
wet, slippery, icy or snow-covered floors. Driving in rain and snow is not allowed.
• Don't jump with the board, don't slide over curbs, railings and other objects!
• Do not disassemble or repair the device by yourself. This leads to LOSS OF WARRANTY.
• Do not store the device with empty batteries. The state of charge of the battery needs to be checked
each month and recharged if needed. Never charge unobserved!
• Cleaning the device with high pressure cleaners or using a garden hose is not allowed. Wipe only with
a damp cloth.
• Depending on the load, the device is subject to more or less severe wear. This can lead to deflection
of the steering, wheel bearings, folding mechanism and the like; this is not covered by the warranty.
Brakes, tires, drive chains and sprockets are wearing parts and are not covered by the warranty. The
drive battery is designed for 200 charging cycles. A gradual decrease in performance cannot be
avoided and is not covered by the warranty.
• Store the device in a dry place at a temperature between 10 ° - 30 ° C.
• Only use the original charger and never charge the battery unobserved
• Do not exceed the design speed of the device. This can easily be exceeded, especially when driving
downhill.
• In any case, find out about the legal regulations applicable in your country for the use of e-skateboards
in public spaces.