F
Manual - MODSTER Compass
28 www.modster.at
Binding the transmitter and receiver
Radio Controller
The yacht comes with a 2.4G 4-channels radio system. For sailing you will only need 2 channels. Learn
all instructions as below:
1. Sail stick controls maximum expand angle of main sail and jib sail. When you move sail stick in
upper position, both sails will be allowed with larger expand angles when wind comes. Both sails
can expand to left or right depends on wind direction.
2. Rudder stick controls rudder to left or right direction.
3. ail trim / rudder trim allows to adjust neutral position of sail / rudder if needed to center.
Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier)
code of a single specific transmitter.
When a receiver is bound to a transmitter, the receiver will only respond to that specific transmitter.
If you need to rebind for any reason, please follow these steps:
1. With the transmitter switched OFF.
2. Power on the receiver, then turn on the transmitter within 5 seconds.
3. After the receiver LED stop flashing, it means the binding is done.
4. Now you are ready to run.
Dual Rate Switch
Rudder stick
No function
No function
No function
Power Switch
Sail trim
Sail stick
Power LED
Rudder trim
