17 / 12
Elevator Trimmer
Elevator
↑↓
Aileron
←→
4.Turn throttle stick up to max and then down to min to arm the motor.
CAUTION: Do NOT operate around people or property, otherwise it may cause serious
damage!
Throttle Unlock(Arming)
To prevent from damages, the throttle channel is locked each time when powering on
your transmitter. Follow below instruction to unlock the throttle.
CAUTION: Keep the propeller in distance for your safety.
Turn the throttle stick up to max position until you hear a "beep" sound. Then turn the
throttle stick down to min position until you hear a "beep" sound.
Now the throttle is unlocked.
Digital Trims
Digital trims allow to adjust the centered
position of rudder or aileron hinge.
Each time when a trimmer is moved, the
servo output will change one step. If the
trimmer is held, the output will scroll in that
direction until the trimmer is released or the
output reaches its end. When you hear a
short "beep" sound, it means the trimmer is
centered.
Aileron Trimmer
Channels Reactions Checking
Place your plane in a neutral position, follow below steps to check the channels reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as
shown in the left diagram(left throttle for example). Swing your plane to check if all servo
surfaces react correctly as shown in the right diagram.
Swing The
Plane
Gyro Reaction
Transmitter
Operaton
Reaction
