background image

Introduction
Specifications 
Kit contents 
Model assembly 
Battery installation 
Receiver diagram
Preflight check
Clevis installation
Control horn and servo arm settings
Center of gravity(CG)
Before flying the model
Flight tips 
Trouble shooting
Spare parts list content

 

Table of contents

Specifications

······················································3
······················································3

························································3

···················································4

···············································7

········

·········································7

·····················································7

·················································8

··························9

············································9

·········································9

···························································10

················································11

········································11

 

Introduction

Kit contents

Before assembly, please inspect the contents of the kit. The  photo below details the contents of the kit with labels. If any 

parts are missing or defective, please identify the name or part number (refer to the spare parts list near the end of the

 manual) then contact your local shop. 

03

Introducing the brand new Arrows Hobby 1100mm J3 Cub!

With classic lines from the golden age of flight, the Arrows Hobby 1100mm J3 is a scale aircraft with predictable trainer-like 

flight characteristics. True to its full scale counterpart, the 1100mm J3's high-lift wing design allows for excellent slow speed 

and STOL (short takeoff and landing) capabilities. 

Details such as a scale two bladed propeller, wing struts, engine and landing gear components, make the J3 look just like 

the real aircraft even upon closer inspection.

The simple, screw-together design allow pilots to spend more time flying and less time building! 

Whether you're looking for a fun weekend flyer or a perfect scale trainee, the Arrows Hobby 1100mm J3 is not to be missed!

 

Wingspan        
Overall length  
Flying weight   
Motor size          
Wing load   
Wing area     
Prop size     
ESC 
Servo 
Recommended battery 

1030mm(40.5in) 
750mm(29.5in)
~ 625g  
3015-KV1700
40.01g/dm² (0.1oz/in²)
15.6dm² (241.45sq.in)

20A

8*4.5, 2 blade

9g Servo x 4
7.4V 1300mAh 20C

A: Fuselage

B: Main wing set

C: Horizontal stabilizer  

D: Landing gear set

E: Propeller set

F: Screws and pushrod

G: Support rod

H: Y- Harness

A. 

D. 

E. 

B. 

C. 

Features

• 3015 1700KV motor, 20A ESC, 4x 9g servos

• Screw together assembly, no glue required

• Excellent low speed and STOL capabilities

 

• Attractive blue and white trim scheme

• Built from lightweight and robust EPO foam

• Vibrant, environmentally friendly water-based paint

G.

H.

Summary of Contents for 280321

























Reviews: