MODI T30-S User Manual Download Page 3

1

Introduction

Thank you for choosing the T30-S Motorcycle 4 Riders full-duplex stereo Bluetooth wireless

helmet headsets, designed for installing into most open-face, flip-front and full-face style helmets.

With the T30-S, you can call hands-free on your Bluetooth mobile phone, listen to music or voice

instructions of GPS navigation, and activate wireless intercom for rider to rider or rider to

passenger intercom talk within range of 2100 meters(Depending on terrain conditions).

The T30-S is compliant with Bluetooth Specification V4.2 supporting the following profiles:

Headset Profile(HSP), Hands-Free Profile(HFP), and Advanced Audio Distribution Profile

(A2DP), and Audio Video Remote Control Profile(AVRCP) and Audio Gateway (AG). It

supports universal pairing with most Bluetooth headsets on the market. The user can activate Siri

or S-Voice from the main unit for voice dialing and other voice commands. The FM radio tuner is

built into the main unit and allows for station scanning.

Superior audio fidelity has been achieved with our high fidelity, non-ported, and ultra-slim helmet

HD speakers. This headset also provides the industry’s best combination of wind and ambient

noise reduction with the miniature boom microphone.

Please read this User Manual carefully before using this product.

Summary of Contents for T30-S



















Reviews: