To install the numbers onto the mounting plate,
insert the two screws included with each number
through the back of the mounting plate for each
number.
Install the risers behind the numbers between the
wall or the mounting plate. The
½
inch riser will
create a broader light spread as opposed to the
¼
inch riser, which will display a more narrow
light
spread behind each number.
If installing directly into the wall, use the appropriate
anchors (not included). Screw the threaded shafts
into the numbers.
Next, run the wires through the drilled holes, being
careful not to damage or strip the wires as you feed
them though to the backside of the mounting plate.
