4
Product Overview
List of Parts
1. Travel Lid
2. Blending Bottle
3. Blending Head
4. Motor Base
5. Power Cord (not Shown)
5
Preparing for use
Carefully unpack the appliance and remove all the packaging materials.
Check that all parts and accessories are enclosed in the package and that the
unit is not damaged.
Handle the Blending Head by the base area only. The blades are very sharp.
WARNING:
Do not touch the blades.Blades are very sharp.Useextreme
care when handling.Failure to do so can result in personal injury.Theappliance is
equipped with a safety interlock system. Itwill not operate if
theBlender Bottle(2) and Blending Head(3) are not located onto the Motor Base(4).
Wash all parts except the Motor Base in warm soapy water, rinse and
dry. Your Smoothie Maker is now ready for use.
Using the Appliance
WARNING:
To avoid accidental starting of the appliance, before assembling
theBlender Bottle and Blending Headto the MotorBase,always ensurethe Power
Cordis unplugged from the wall socket.
Step 1:
Place the MotorBase on a stable, flat and stain resistant
surface.Remember, ensure the power cord is not connected at this stage.
Step 2:
Prepare the ingredients for your smoothie.Peel orcore any
fruits/vegetables andcut them into smaller pieces before placingthem into
the Blender Bottle.
Step 3:
Add some water. Normally you can fill to the 600ml marks but allow a
little more space if any of your ingredients will produce a lot of froth.
Step 4:
Carefully screw the Blending Head to the threaded top of the Blender
Bottle as shown in DIAGRAM A. Tightenadequately to avoid any leakage.
Step 5:
Invert the Blending Bottle / Blending Head assembly and locate it on to the
Motor Base. Twist clockwise to secure. See DIAGRAM B.
Step 6:
Connect the Power Cord(5) to a suitable wall socket and switch the socket
on.
Summary of Contents for 184833
Page 7: ...Size 14 8x21cm 12...
