2
modernforms.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.
PREPARATION
1. Shut off the power at the circuit breaker and remove existing
fixture, including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on
a clear area. Be careful not to lose any small parts necessary
for installation.
CONNECTING THE WIRES (Fig. 2)
3. Remove the mounting screw (C1) from the fixture.
4. Connect the driver input wires with junction box wires as
shown in Fig. 2, making sure that all wire connectors (A1)
are secured. If your outlet box has a green or bare copper
ground wire, connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly to the
mounting plate using the green screw provided. After wires
are connected, tuck them carefully inside the junction box.
*Require Driver to be recessed within the junction box.
MOUNTING THE FIXTURE (Fig. 1)
5. Secure mounting plate to the junction box using junction
box screws (B1), the side of the mounting plate marked “GND”
must face out.
6. Drill a hole in the wall aligned with the screw tube located on
the fixture tail, insert the plastic anchor (D1), fasten the wood
screw (E1) and the iron studs (H1) to the plastic anchor.
7. Insert the crystal onto the fixture, secure it with screw (J1).
8. Place the fixture over the mounting back plate and secure it
with mounting screws (C1).
9. Insert the screw tube to the iron studs, fasten it with
Allen screw (G1) using the Allen Wrench (F1).
C1
A1
B1
E1
H1
D1
G1
F1
J1
Mounting Screw
Wire Connector
Junction Box Screw
Wood Screw
Iron Studs
Plastic Anchor
Allen Screw
Allen Wrench
Screw Tube
4”
5 1/2”
Fixture
Driver
Mounting Backplate
Junction
Box
Ground Wire
Screw
Red Wire
Black Wire
White Wire
Black Wire
FIG.1
Back Plate Dimensions
3 1/2”
INSTALLATION INSTRUCTION
Elessar - LED Wall Sconce
WS-66641
Fixture Wires
Brown
Fixture Wires
Blue
Fixture Wires
Yellow Green
House Wires
Hot
House Wires
Neutral
House Wires
Ground Wire
Fig. 2 Wiring
