22
FR-W1916-56L
FIG.20
14. Wall Control Operating Instructions
(cont.)
Pairing
If you need to re-pair your fan or you want to pair a second wall control:
1.
Power cycle your fan by turning off the power at the
circuit breaker.
2.
Press and hold
and
buttons on wall control for
10-15 seconds.
3.
The LED will blink green then remain solid green.
4.
The green LED along with audible beeps will indicate
that pairing is successful.
5.
Test wall control for functionality.
NOTE:
Purging must be completed within 3 minutes of turning the power
Unpairing
NOTE:
Purging must be completed within 3 minutes of turning the power
on to the fan receiver.
1.
When you re-engage power to the fans you want to purge, press and
hold the
and
buttons for 4 seconds.
2.
The LED will alternate red/green, blink green, and the receiver will
beep to indicate that purging is successful.
Multi Location Wiring
1.
Install the wall control using the wiring diagram below.
2.
Individually pair each of the wall controls with the fan receiver using
the pairing instructions in the previous section.
NOTE:
Pairing must be completed within 3 minutes of turning the power
on to the fan/receiver.
Fa
Fann
Line/Hot
W
all
C
on
tr
oller 2
W
all
C
on
tr
oller 3
W
all
C
on
tr
oller 1
Neutral/White
If Applicable
Ground (Green
or Bare)
Red
Fa
Fann
Line/Hot
W
all
C
on
tr
oller 2
W
all
C
on
tr
oller 3
W
all
C
on
tr
oller 1
Red
If Applicable
W
all
C
on
tr
oller 2
Ground (Green
or Bare)
Neutral/White
Summary of Contents for NIRVANA FR-W1916-56L
Page 32: ...modernforms com FR W1916 56L ...
