32
7.2. Boilers intended for pellets burners
1. Boilers purchased together with the burner
Boiler in this case is delivered complete with additional doors (to be
assembled) that allow the boiler to be operated with the burner. Burner is
delivered together with a container and a feeding pipe.
In order to install the burner, disassemble doors on the front vertical face of
the boiler and install doors equipped with a connecting adapter for the pellets
burner (they are packed inside the boiler chamber). Proceed with installation
according to the burner instructions (enclosed with the boiler documentation).
!Note: Do not dispose of the disassembled doors. They will be needed to
start up the boiler if the burner is disconnected.
2.
Burners purchased for a boiler already in operation
Models 2010 and later.
If you are operating a boiler and after some time decided to install the
pellets burner, this will not constitute a major problem. First, you will have to
prepare a suitable place in the boiler room (it is necessary to consult Moderator
technical support) and place an order. When you receive your shipment, replace
doors on the vertical face of the boiler (doors will be delivered along with the
burner). Before this, it will be necessary to remove cast-iron ante-doors installed
inside the frame. After that, proceed according to burner installation
instructions.
!Note: Do not dispose of the disassembled doors. They will be needed to
start up the boiler if the burner is disconnected.
Models 2009 and earlier.
In this case when ordering the burner, you will have to specify the spacing
of boiler vertical doors’ hinges to allow us to produce replacement doors. Then,
proceed as per instructions for 2010 models.
!Note: Do not dispose of the disassembled doors. They will be needed to
start up the boiler if the burner is disconnected.
