English
39
Cleaning the spray arms
It is important to periodically clean the spray arms
from the chemical constituents of hard water that will
clog the spray arm. To release the spray arm, turn
the nut clockwise to release the washers on the top
of the spray arm and remove the spray arm. Wash
the spray arm with soap and warm water, use a soft
brush to clean the spray. Replace the after rinsing.
Caring the Dishwashing Machine
To clean the control panel, use a soft damp cloth
and wipe it until dry.
To clean the exterior, use an equipment polish with
good quality. Do not use sharp objects, abrasive
brushes or harsh cleaners on parts of this unit.
Cleaning the Door
To clean the sides of the door, use a soft cloth
dampened with warm water. To prevent the entry of
water into the lock and electrical components, do not
use spray cleaners. Also, do not use abrasive
cleaners or scouring brush on the outer surface as it
will cause scratches or scars.
Maintenance
-
Every time finished the washing.
Every time finished using the machine,
close the water supply and leave the door
slightly open so the moisture and odor
free from the machine.
-
Seal
One of factors that contributed to the smell
is the leftover that inserted / trapped in
part of the seal / rubber on the door, clean
the seal / rubber on the door regularly.
-
Disconnect the power cord.
To avoid the risk, before cleaning or
performing the maintenance, always
unplug the power cord from the outlet.
-
Move the dishwasher
When moving the engine makes sure the
upright position, if have to tilt it towards
backward.
-
Do not use abrasive cleaners or
solvents.
To clean the exterior and rubber parts of
the machine, do not use solvents or
abrasive cleaners. To clean just use a
cloth and warm water mixed with a mild
soap. To remove stains or spots inside the
machine, use a soft cloth dampened with
water and white vinegar, or use special
cleaning agent for dishwasher.
-
When on vacation
When on vacation, it is advisable to run
the washing machine with an empty
condition and then unplug the power cord
from the outlet, close the water supply and
leave the door open slightly. This is to
avoid the seal closed too long and smells
arise in machine.
CAUTION!
Plumbing
and
electrical
equipment should be performed
by a professional person
WARNING!
Dangers of Electrical Shock!
Disconnect the power before installing
the
machine.
The
error
in
the
installation can result in electrical
shock or death.