8
Water Connection
Connect the cold water supply hose to a threaded 3/4
inch connector and make sure that it is fastened tightly
in place. If the water pipes are new or have not been
used for an extended period of time, let the water run
first to make sure that the water is clean and free of dirt.
If this precaution is not taken, there is a risk that the
water inlet can get blocked and damage the appliance.
Please Note: If the supplied hose does not fit your tap, please contact your local
plumbing supply center where adapters are available for purchase.
Drain Hose Connection
The connection of the drain pipe: Put the end of the drain to a sink or bucket.
How to Drain Excess Water
If the sink is 1000 mm higher or more than the floor, the excess water in hoses
cannot be drained directly to the sink. It will be necessary to drain the excess water
from hoses into a bowl or suitable container that placed outside and is lower than
the sink.
Water Outlet
Connect the water drain hose. The drain hose must be installed properly to avoid
water leaks. Ensure that the water drain hose is not kinked or crushed.
Install the drain pipe to the back pipe
of the machine. The interface is fitted
with clamps and tightened with a
screwdriver.
Fix the drain pipe with suction cups
