Modena RX 7632, User Manual Book

Page: 6 / 14

6
4. Install the screw on noth upper holes
and set aside 1 cm between the head
of the screw and the wall surface (5).
5. Install the exhaust hood on the
screwes wall by suspending the vent
hood on the screq (6).
6. When the exhuast hood is positioned
correctly on the wall, tighten both
screws on the upper part (7)
7. To reinforce the exhaust hood handle on the wall, install the
screws on both holes on the bottom part (8) and tighten them
(9).
8. Reassembling the aluminum filter.
9. Connecet the exhaust system with the spigot/falnge if the
exhaust hood is to be operated as a ducting/ exhaust system.
Installation on the bottom part of the kitchen set
1. Put the exhaust hood on the bottom
part of the kitchen set in accordance
with the planned position.
2. Mark the bottom part of the kitchen
set for flexible pipe hole and then
create a hole if the exhaust hood is to
be operated with ducting/exhaust
system.
3. Install the exhaust hood with 4 screws on the prepared position.
4. To reinforce the exhaust hood handle on the kitchen set, install
the screws on other holes on the upper part and tighten them.
5. Connect the exhaust system with the spigot/flange if the
exhaust hood is to be operated as a ducting/exhaust system.