Modena Puro Series, User Manual Book

Page: 9 / 11

8
Perform the following preventive measures before operating the vacuum cleaner:
−
Read all instructions thoroughly and pay attention to the pictures before operating the vacuum
cleaners.
−
Check the voltage specifications on the vacuum cleaner whether it matches with the voltage in your
house. If it doesn’t match, contact the MODENA Call Center for further information.
−
Do not leave the vacuum cleaner while it is still connected to the socket. Always unplug the power
cord from the socket if the vacuum cleaner is not used.
−
To avoid electric shock, do not use the vacuum cleaner outside the house or out in the open area
and do not put or submerge the power cord or plug in the water or liquid substance.
−
Tight supervision is required if vacuum cleaner is used around the children.
−
Do not operate the vacuum cleaner if the power cord or the plug is damaged, dysfunctional, taking
fall damage, or broken. Take it to our Call Center for inspection & testing, rearrangement of
electrical or mechanical functions, and necessary repairs.
−
Usage of additional equipment/tools without recommendations and not supplied by the manufacture
may result in fire, electric shock / shortage and damage to the vacuum cleaner.
−
Special attention is required for usage on stairs.
−
If the air inlet, pipe nozzle or telescopic pipe is obstructed, immediately deactivate the vacuum
cleaner and clear the obstruction before restarting it.
−
Make sure you plug the power cord to the socket with dry hands.
−
Remove large or sharp objects on the floor before using the vacuum cleaner to avoid damages to
the filter.
−
If you wish to unplug the power cord from the socket, pull the plug, not the cord. The damaged cord
and plug must be repaired by a qualified technician.
In the event of operational issues, check the following problems and solutions below before contacting
our Call Center:
Problem
Cause Solution
Weak Suction Power
-
Filter are obstructed.
-
Brush or nozzle are
obstructed.
-
Flexible pipe is obstructed.
-
Clean filter.
-
Clean the brush and nozzle
from dust.
- Clean the flexible pipe
The motor cannot rotate /
vacuum
-
Is the cord plugged to the
socket?
-
Has the ON button been
pressed?
-
Reconnect the power cord
with the socket.
-
Press the ON Button
Part 5:
Precaution Action
Part 6:
Problem & Solution