5
2.
Water Control Automatic Ignition: by simply open the water valve
and the igniter, this feature will ignite automatically and the hot
water will immediately be available.
3.
Water Temperature Controller: adjust the water temperature as
needed.
4.
Flue-type Exhaust Device: vent the exhaust gas out to keep the
indoor air fresh.
5.
Water Temperature Display: provided with low battery indicator
function.
6.
“Low Water Pressure” Start-Up: this water heater can be turned on
with low water pressure. This feature equipped with a wide range
of application.
7.
Steady Water Volume: effectively avoid the impact of the water
pressure fluctuation on the water volume and the outlet water
temperature, as well as prevent the over-hot water output due to
high water pressure.
8.
Flame-Out Safety: the water heater will automatically cut off the
gas if the flame accidentally flows out during the use period.
9.
Water-Gas Linkage Controller: the water heater will automatically
stop the combustion and shut down if the water supply line is
blocked or the inlet valve is closed.
10.
Over Pressure Protection: when the pressure of the water supply is
too high, the safety valve can automatically relieve the pressure to
avoid any damage to the water heater.
11.
Thermal Protection: the water heater will automatically cut off the
gas and stop working when the temperature of the water output
exceeds 90 °C or dry-heating occurs.
12.
Auto Cut-Off: the water heater will automatically cut off the gas
and power after 20 minutes of continuous operation. It can
continue to work after re-start.
