9
.
Always remove the plug from the socket before performing maintenance on the vacuum cleaner.
1. Clean the unit using dry cloth. Do not use shining powder, detergent, gasoline, acid, thinner, oil or
hot water to clean any part of the unit.
2. Remove the inlet and outlet air filter, clean the filter by submerging it in warm water, and dry the filters
inside out
. After it’s dried, reinstall it back to the vacuum.
If the unit is not going to be used for a long time, store it in a dry place with good circulation. Keep it
away from children.
DISPOSAL
Environmental Preservation
Electronic waste should not be disposed of with household waste.
Hand over the property to an electronic dump site. Ask for advice from
the retailer or the local authorities on how to perform proper disposal
and recycle.
Batteries
Batteries waste should not be disposed of with household waste.
Hand over the property to a batteries dump site. Ask for advice from
the retailer or the local authorities on how to perform proper disposal
and recycle.
Perform the following preventive measures before operating the vacuum cleaner:
−
Read all instructions thoroughly and pay attention to the pictures before operating the vacuum
cleaners.
−
Check the voltage specifications on the vacuum cleaner whether it matches with the voltage in
your house. If it doesn’t match, contact the MODENA Call Center for further information.
−
Do not leave the vacuum cleaner while it is still connected to the socket. Always unplug the
power cord from the socket if the vacuum cleaner is not used.
−
To avoid electric shock, do not use the vacuum cleaner outside the house or out in the open
area and do not put or submerge the power cord or plug in the water or liquid substance.
−
Tight supervision is required if vacuum cleaner is used around the children.
−
Do not operate the vacuum cleaner if the power cord or the plug is damaged, dysfunctional,
taking fall damage, or broken. Take it to our Call Center for inspection & testing, rearrangement
of electrical or mechanical functions, and necessary repairs.
−
Usage of additional equipment/tools without recommendations and not supplied by the
manufacture may result in fire, electric shock / shortage and damage to the vacuum cleaner.
Part 5:
Precaution Action
Part 4:
Maintenance
−
Make sure the filter is dry when being reinstalled to the vacuum cleaner.
−
Make sure it is placed in its proper place.
−
−
Clean the filter
Clean the dust bag
