Modena FT 6620G, User Manual Book

Page: 14 / 16

14
Important:

DO NOT spill or pour water into burners or controls,

DO NOT immerse cabinet in water. Damage to int ernal c omponent s will occur.

Damage to internal components from water damage is NOT covered by warranty.
Please perform checking procedure on the following things before contacting MODENA Call Center when
problems occur:
Problems Possible Causes Recommended Action
Burners does not light
1. Gas supply is off
2. Air in lines
3. Pilot
valve is not
igniting
1. Check main / unit gas valves.
2. Turn gas valve on. Try to light
pilot every 15 sec.
3. Turn off gas - allow unit to vent
for 5 minutes. Turn gas back on
and light pilot.
Front or rear won’t light
1. Control is not on
2. Water in burner
3. Damaged
temperature
control, burner or other
internal component
1. Turn temperature control ON Set
to desired setting when lit
2. Remove burner and dry
t horoughly
3. Cont ac t Modena Call Cent er
for repairs
Pilot does not light
1. Gas supply is off
2. Air in lines
3. Pilot valve is not lit
1. Check main / unit gas valves
2. Turn gas valve on. Try to light
pilot every 15 sec.
3. Turn pilot valve on / adjust
Burner is not hot enough
1. Temperature control is
not set
2. Shutter or nozzle out of
adjustment
3. Damaged temperature
control, burner or other
internal component
1. Adjust for desired temperat ure
2. Contact
authorized technician
for adjustment
3. Contact Modena Call Center for
repairs
Note: There are no user s ervic eable c omponent s in t he burner assemblies or in the control valves. In all cases
of damage or malfunc t ion, contact MODENA Call Center for repairs.
Mentioned troubles are just for reference. If any failure occurs, please stop using, and inform contacting MODENA
Call Center or the authorized technicians to check and repair.
Safety first! Please cut off the electric and gas source before maintenance.
Part 5: Troubleshooting