English 9
•
First, open the outlet valve, and then open the inlet valve. The water heater
gets filled with the water. When the water flows out of the outlet pipe, it
implies that the water heater has been filled fully with water. Then, closes
the outlet valve.
•
Insert the power plug into the power socket.
•
If the indicator lamp lights up, the thermostat will automatically control the
temperature. When the water temperature inside the heating tank has
reached the set temperature, the water heater will switch off automatically.
If the water temperature falls below the set point, the water heater will turn
on automatically to restore the default temperature.
•
Rotate the knob according to the knob marker to increase or decrease the
temperature.
•
In a power-on state, the water heater is heating when the indicator light
turns blue. The indicator light will turn off when the heating process is
finished, and the water heater is in the insulating state.
PART 4: HOW TO USE