11
Operating the Unit
Rotate the knob according to the marking scale on the knob to increase or
decrease the temperature setting.
The green “Power” LED and red “Heating” LED will remain ON as long as the
power is generated to the system. The red LED will turns off when the water
temperature reaches the user setting, at the end of the heating phase.
The water heater needs to be turn on for a certain period of time to reach the
acceptable temperature.
During the heating process, it is normal if there is a slight drip at the safety valve.
Please do not cover the safety valve of the outlet hole.
Connect this outlet hole to a discharge pipe. Water may drip from the discharge
pipe of the safety valve; therefore this pipe must be exposed to the atmosphere
(air).
The safety valve has to be operated regularly (preferably at least every six
months) to remove limestone deposit and to ensure that the safety valve is not
blocked.
Introduction to Product Function
Heating function: the heating temperature can be set within 30
o
C to 75
o
C.
Safety function: use anti-dry protection for overheat protection to keep saving of
the unit when using.
Product Features
Super Tank, Single Weld Line with Titanium Porcelain Enamel coating which is
rut-proof, erosion-proof and with higher efficiency and having a longer life span.
Energy saving with minimum heat loss. The water temperature is able to be
maintained up to 48 hours after the electricity is switched off.
Rate power heating: 250W/350W.
Picture 12
