6
2.
Remove the pressing plate of
the power cord and keep the
screws.
Tighten the wire-pressing plate
with the screws to the primary
position. Make sure that the
power cord doesn’t come loose
when it is pulled at 60N force
.
3.
Gash the middle of the outer
jacket with a sharp knife in
order to insert the power
cord (lines).
6.
Connect the end of the power
cord to wiring terminals; the
method is as shown in the
image.
NOTE
The installation of every ends of neutral line (blue), live line (brown
/red) and earth line (green/yellow) should be corresponding to the
other end on wiring terminals
5
.
