English 19
-
Sliding the chimney to adjust the chimney height. When the height you required is reached,
then hang the fixing hole to the fixing screws as showed in below pictures:
-
Drill 2×8mm holes to accommodate the plate II. Screw and tighten the plate II onto the wall
with two screws provided. Assembly the chimney onto the unit and fix it with two screws.
For Tower model
-
By Put the inner chimney int o upper chimney .Then pulling out the upper chimney upwards. Adjust to
reach the height required.
-
Fix the lower chimney with two pieces of 4x8mm screws.
