Modena Carrara Series, User Manual Book

Page: 13 / 34

13
4.
To repair a leaked connection, follow these instructions:
• Disconnect the regulator from the gas cylinder
•
Secure the hose clamp on the leaked connection
•
Repeat the gas leakage test (points a to c).
5.
For gas stoves with gas cylinder compartment secured with cross
iron, install the cross iron on the stove, open the gas compartment
door on the stove and install the cross iron by inserting the cross iron
ends to the supporting holes.
6.
Remove all stainless steel cover on stoves made of stainless steel
materials, especially its working table.
7.
Connect the power cord to the power socket.
8.
Insert the gas cylinder to the gas cylinder compartment for stoves
equipped with gas cylinder compartment
9.
Install the regulator on the gas cylinder. Stove is ready to use
Installation in the Kitchen Cabinet
This product can be installed between the kitchen set, as long as the
sorrounding cabinets are resistant to heat over 90°C, including the
walls on the side and the back of the unit.
ATTENTION
Inspect electrical voltage and make sure that the voltage meets the
requirement specified in the manual.
ATTENTION
For stoves without gas cylinder compartment, store the gas
cylinder near the stove.
ATTENTION
Gas leak test should be performed by a certified technician
or MODENA Service Center official
.