background image

15 

 

 

Under the child lock mode, all controls button are disable except the ON/OFF  

 and child lock 

 . You can 

always turn the hob off with the ON/OFF 

 control in an emergency, but you shall unlock the hob first in the 

next operation 

NOTES:

 

Under Child Lock function, if you turn the hob off, the Child Lock function will still be activated. If you want to turn on the 
hob after that, you need to deactivate Child Lock function first

 

Stop & Go Function 

 

 

Make cooking easy!

 When cooking, your doorbell rings, phone rings, or kid shouts from another door. Need to step 

out of kitchen? These means dinner could burn, or take longer time to ready if you switch everything off. 

  The 

Stop & Go function

 can turn off all zones. When you back, with touching of the button once more 

, hob restarts 

where they were, to continue cooking.

   

 

ActiveStop & Go function 

To activate 

Stop & Go

 function, you can press the 

Stop & Go

 function button once. Then all programmed setting be hold 

on and hob stop heating, all heat setting indicators show “P”. 

Inactive Stop & Go function 

To cancel 

Stop & Go

 function, you can press the 

Stop & Go

 function again, after come back. Then all programmer setting 

will return to what they were

, Stop & Go indicator “P” disappear from all indicators. 

 

When 

Stop & Go

 function activated, all control buttons are disable except the ON/OFF and Stop & Go button.  

 

Notes: 

The hob will auto turn off, if Stop & Go function last more than 10 minutes. 

Using Timer 

When the hob is turned on, you can use the timer in two different ways: 

• 

You can use it as a minute minder ( 

only for BI 1325

). In this case, the timer will not turn any cooking zone off 

when the set time is up. 

• 

You can set the minute minder/timer for up to 99 minutes. 

 

 
 
 
 
 
 
 

 

Summary of Contents for BK 1635

























Reviews: