Model Train Technology LSC IIa, User Manual

Page: 21 / 28

20
MODEL TRAIN TECHNOLOGY ™
WRITING CVs WITH THE KEYPAD
If you don’t have a DCC system, it is still possible to change CV values
in the range of 112 to 191 with the keypad. Check the MASTER CV LIST
for the specific value you may want to change.
To enter CV write mode, Press and Hold the two black DOWN ARROW
keys (one on the left and one on the right). The display will show a “C”
and then the number 112, which is the first CV value that can be
configured. Use the up and down keys on the RIGHT side to select the
CV you want to change. Then, using the LEFT side Up/Down keys you
switch the display to show a dash “-“followed by the current CV value.
Using the right side Up/Down keys select the new value for the CV.
Use the left side arrow keys to switch between CV Address and CV
value. Press SAVE to write the new CV value.
To exit the CV mode, press the Keypad On/Off button.
SETTING THE DCC ADDRESS OF THE LSC IIa
1. Press the Green button to enter configuration mode.
2. Press and hold the WHITE button for 8-10 seconds.
The display will flash “8888” and then show the currently assigned
address with a blinking decimal point. The ONLY time and place where
there are blinking decimal points is in address setting mode.
To change the address, press the RIGHTSIDE blue buttons up and
down.
** holding down the up or down button will speed up the changing of
the numbers. Holding for more that 50 digits will put the scrolling into
hyper speed scrolling. Release to stop.