January 2021
11
CV
Behavior
Comments
47
Saved Default Brightness for
Main LEDS
Use F0 On, F4 On to activate "Speed" control and
F2 to save. Valid value 1-127
48
Saved Default Brightness for
REAR LEDS
Use F3 On, F4 On to activate "Speed" control and
F2 to save. Valid value 1-127
49
Fade speed interval
Set via CV only
50
RESERVED
51
F3-sync
Makes AUX pads follow MAINS only. Off=0,
On = any non-zero number
52
AUTO-ON
Set to “1”, ALWAYS turn on at Power Up
regardless of F0 setting. NCE® needs this set to =1
53
Auto-On for AUX pads
0=Off, 1=0n, 2-Flicker, 3-blink
54
Fade On/Off
Sets default 0=Off, 1=0n
55
Always ON (MAIN)
Light is on regardless of DCC commands.
56
Always ON (AUX)
Light is on regardless of DCC commands.
61
Set for NCE DCC
Adjust the F2 delay for address programming.
7
READ ONLY - Software
Version
FYI - in case we need to know which board you
have.
CONFIGURATION VARIABLES (CV) CHART
