੦ഝ
੦ഝ
Set hex nut in the holder. (Please implant it deeply.)
Set the holder on the arm and secure with the lnurled screw.
Set hex nut on the inside of the main unit. (Please implant it deeply.)
Secure the one assembled in 1. and 2. to the main unit with hex socket head cap screw.
(The mounting angle will be adjusted later.)
Assemble the other (left ot right) side in the same way as .
1. Attach the Arm and Holder to the Main Unit
Focus of the laser pointer can be adjusted by rotating the tip. Be careful that the
spring can be easily dettached if you loosen it too much.
Be careful not to over tighten screws. Screw holes might be damaged.
1. Place 4 setscrews at small holes of resin parts.
2. Insert the laser pointer into the holder with keeping the board *horizontally*.
Reassembling Method after Disassembling and Cleaning
2. Set Laser Pointer
ٮ
ٮ
Keep a board in
horizontal position.
Arm
Knurled Screws
Hex Socket Head Cap Screw
Small Hex Nut
Big Hex Nut
Flat Washer
3
1
2
1
4
4
〜
1
5
3
2
4
4
