www.modecom.eu
4
INTERNAL CARD READER
Hardware setup for internal multi card reader
1. Remove your computer case and locate an empty 3.5” fl oppy bay.
2. Insert Internal card reader into the empty 3.5” fl oppy bay and fasten it with screws.
3. Internal USB cable pin 1 (VCC Pin) has to
be connected to the USB
pin 1 (Power pin)
on your motherboard. Please refer to your
motherboard manual for USB header pin as-
signment information.
Note:
Internal USB cable consists of Red, White , Green and Black
wires. Each color wire shall be connected to specifi c pin to the
USB header of motherboard.
Installing the Card Reader Driver
Attention: Please install the Card Reader before the driver installation.
1. Insert the Drivers CD into your CD-ROM drive. The CD will auto run upon in-
sertion.
2. The InstallShield Wizard will appear. Follow the on-screen prompts to install
the software.
3. Click “Next”.
4. Click “Finish” to complete the driver installation and restart your computer.
5. Four new drive icons are created that can be accessed via My Computer utility.
Summary of Contents for mc-cr102
