18
8
SEQ-MODE
8.2 Menu-functions and display
Some functions in SEQ-mode need to be adjusted using the display and the navigation-cursor.
With SEQ-mode being selected by pressing
SEQ
, the display shows the
sequence-selection-
menu
. Select the sequence to be edited here.
•
S01
shows the current sequence (S01 to S16). Carry out the selection using
DEC
and
INC
.
•
T01
displays the track where the current sequence is located (T01 to T12). The selection is
carried out using
UP
and
DOWN
.
In correspondence to the selection, the display will inform you about:
• the track-type (
MONO, POLY, DRUM
)
• the type of MIDI-data being generated (
NOTE, TRIG
)
Attention: When changing from JAM-mode to SEQ-mode, both buttons are lit and the
display will show:
Now, select the desired sequence from the matrix and press SEQ again to open the menu for the
sequence-selection (see page 19)
Pressing
ENTER
will open the
sequence-edit-menu
:
SELECT SEQUENCE
IN MATRIX
MONO
EDIT
T01 S01 STEPS 16
Track
Sequence
Parameter
(UP / DOWN)
Value
(DEC / INC)
Edit Mode
Track Type
MONO PATTERN
T01 S01 NOTE
Track Type
Track
(UP / DOWN)
Sequence
(DEC / INC)
MIDI Data Type
(Function Buttons)
Select Mode
