9
nication channel of the keyboard and mouse to the receiver is independent and
diff erent, which means one receiver can receive signal only from one keyboard
and one mouse. Under below circumstances, you should do the „establishing
communication channel” operation:
• Your fi rst time uses the combo;
• Re-installation or after charging the batteries;
• Other people use the same keyboard and mouse, and their communication
channel happens to be the same as yours, which causes disturbance;
• Someone establishes communication channel operation on you combo un-
consciously, but fails.
1. Press the CONNECT button at the bottom of the mouse once (<2seconds).
2. Within 5 seconds, press the CONNECT button on the receiver. Waiting for 10
seconds, if succeed in communication, the mouse
should be used normally, at the same time the com-
munication indicator LED will light on. If the mouse
fails to work normally after 10 seconds, please repeat
the previous step again. Remarks: For the fi rst step, if
the pressing time is longer than 3 seconds, the mo-
use will be turned off manually; it will not change the
state of communication channel, so you do not need
to operate „The establishment of communication
channel between mouse and receiver” again.
CO
COM
C
O
N
N
E
C
T
