background image

Horizontal Filter Dust Collector Owner’s Manual

Copyright© 2018 Mod-U-Blast®, All Rights Reserved

6

Clean 

Air 

Outlet 

Compressed 

Air Supply 

Goyen 

Valve 

Hopper 

Dirty 

Air Inlet 

Blower On 

Normal Operation 

Blower On 

Filter Cleaning 

Operation 

Goyen valves open 

in sequence from top 

to bottom knocking 

dust out of the filters  

Filters 

OPERATIONAL DIAGRAM 

 

Throughout normal operation, the dust laden air enters the dust collector through the dirty air inlet plenum. The dirty air flows 

downward towards the hopper and the filters remove the fine dust allowing clean filtered air to pass through the filters and out 

past the blower fan.  

 

Filter cleaning occurs when a signal from the dust collector control panel is sent to open the goyen valves allowing a rush of air to 

go through the filter bank knocking the dust out of the filters and down into the hopper.  

Dirty 

Air Inlet 

Clean 

Air 

Outlet 

Operational Diagram

Throughout normal operation, the dust laden air enters the dust collector through the dirty air inlet plenum. The dirty air flows 
downward towards the hopper and the filters remove the fine dust allowing clean filtered air to pass through the filters and out past the 
blower fan. 

Filter cleaning occurs when a signal from the dust collector control panel is sent to open the goyen valves allowing a rush of air to go 
through the filter bank knocking the dust out of the filters and down the hopper.

Summary of Contents for M12000-24C
















Reviews: