Mockett PCS88-90, User Manual, Page: 9 / 14

6 PCS88-90 / PCS88-94 - Installing the PCS88-90 / PCS88-94
5 Installing the PCS88-90 / PCS88-94
To install the PCS88-90 / PCS88-94 perform the following steps:
1. Cut an opening in the table (see Section 5.1 ).
2. Insert the PCS88-90 / PCS88-94 through the cut-out opening (see
Section 5.2 ).
3. Connect the cables (see Section 5.3 ).
5.1 Cutting an Opening
The thickness of the table should be 1” min. to 3” max.
2. Lay the template flat on the surface and trace the INSIDE edge on the
work surface.
1. Use the template and trace the inside edge cut out on the workaurfce.
3. Remove template and use the trace of the INSIDE edge of the template on
the surface to cut with a sabre or keyhole saw according to the dimensions
shown in
Figure 4 (not to scale).
i