5
Installing the
PCS87
/M/USB
Drilling a Hole in the Table
To drill an opening in a table:
1. Using any standard cup bit drill with a diameter ranging from 111mm to 114mm (4.37
” to
4.49
”), drill a hole in the table in the desired location.
The thickness of the table should be 76mm (
3”) or less.
2. Clean the table surface.
Take care not to damage the table.
Mockett
is not responsible for any damage caused to
the table.
Mounting the
PCS87/M/USB
in a Table
To mount the unit, follow these steps:
Step 1
: Insert the
PCS87/M/USB
into the
hole cut
into the table, making sure the
outer rim is firm against the surface of the
table.
