Rotate the cot on its side and attach 2 x screws (A) to panel (3). Tighten
with an Allen Key (C). Once assembled lift furniture into place, do not
drag. You’re done, enjoy!
7
8
Tahoe Cot
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3
A
C
B
B
B
B
6
OPTIONAL/MATTRESS HEIGHT ADJUSTMENT
(please keep these
instructions handy for future reference)
To adjust mattress base settings, remove small plastic plugs. This will
require a small amount of force, please note these are not screws and
cannot be screwed out. You will need a screwdriver that fits into the
centre hole and possibly a hammer, or similar, to gently tap the end
until the plug pops out.
Repeat steps 2, 3 and 4 by removing the side panel and moving the
base to corresponding holes. Securely attach again in the adjusted
position.
