Assembly Instructions
mocka.co.nz | mocka.com.au | PO BO X 6171, Mar oochy dor e BC, QLD, 4558
Scout Desk
L
N
M
11
12
11
10
Pull the slider on F1 forward to a fully extended position. Line the
drawer up with the slide rails. F2 should cup inside F1.Insert the run-
ners into each other and push in around 4cm.Lift up the tabs on F2
and insert the drawer past halfway and release.Fully close and open
the drawer a few times to allow the runner to properly engage.
If the drawer cannot be pushed in or stuck, do not force it in. Lift the
tabs, remove the drawer and repeat the steps above.
7
Once assembled lift furniture into place against a wall, do not drag.
Secure the bottom of the 2x straps (L) to the cabinet with 2 x screws
(M). Attach the top end of the straps (L) to the wall using 2x wall plugs
(N). Tighten with a screwdriver.
