1
2
Place the ottoman cushion (G) upside-down on a clean, soft and level
surface. Attach ottoman base (C) to cushion (G) using 4x 30mm bolts
(J). Tighten with the allen key (M).
Fit the top of the long cylinder (B) (there are two cylinders - use the long
one) into the ottoman base (C) as shown. Fit legs (A) onto the cylinder
(B) and press down to fit into place. Carefully turn the ottoman over onto
its feet. Ottoman weight limit = 110kg.
J
J
J
J
C
G
C
G
B (long)
A
Ottoman Assembly
M
3
4
Join the chair back rest (F) to the chair seat (E) by attaching the left [L]
and right [R] steel brackets (I) as shown. Secure using 8x 15mm bolts
(K) and tighten with the allen key (M).
Attach the left and right arm rests (H) to the brackets (I) using 4x 20mm
bolts (L) and tighten with the allen key (M). Zip tabs to the back on each
side.
Chair Assembly
F
I
K
E
I
K
L
L
L
H
(right)
H
(left)
M
M
L
L
R
R
R
L
L
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
3
mocka.co.nz | mocka.com.au
