Mocka Neva Cot Assembly Instructions Download Page 4

Page: 4 / 4

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Neva Cot

OPTIONAL:

To adjust mattress base setting, repeat steps 2 and 3 by

removing the side panel, unscrewing screw (A) and move the base to

the corresponding holes. Securely fasten again in the adjusted postion

and replace the screws, using the spare holes you took the base from.

Summary of Contents for Neva Cot

Page 1: ...300mm long x mm wide x 100mm in thickness The width and length are specified because it is important that gaps between the mattress and the sides and ends of the cot will not exceed 40mm This is to mi...

Page 2: ...nz mocka com au PO BOX 6171 Maroochydore BC QLD 4558 Attach panels 1 to panel 2 and secure with 8 x screws A and 4 x washer G Tighten with an Allen Key D 1 1 2 A G G G G G A A A Attach panels 1 to pan...

Page 3: ...unit into the desired location You re done enjoy 3 3 4 All done Regularly check all screws are suitably tightened Place the correct sie mattress into the cot before use To clean use a damp cloth avoi...

Page 4: ...Neva Cot OPTIONAL To adjust mattress base setting repeat steps 2 and 3 by removing the side panel unscrewing screw A and move the base to the corresponding holes Securely fasten again in the adjusted...