9
10
Attach 1x stopper (O) to door panel [11] using 1x screw (E). Attach 2x
hinges (P) to panel [11] and secure with 4x screws (E). Attach 1x
stopper (O) to door panel [12] using 1x screw (E). Attach 2x hinges (P)
to panel [12] and secure with 4x screws (E).
Secure door panels [11] and [12] to the main unit by attaching the other
end of the hinges (P) with 16x screws (E) as shown.
12
11
E
O
E
O
P
P
E
E
E
E
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
12
11
x4
P
E
11
12
Attach 1x stopper (O) to panel [13] using 1x screw (E). Attach side panels
[14] and [15] to panel [13] using 4x bolts (B) and secure with 4x locking
nuts (C). Tighten with a screwdriver. Slide panel [17] along the grooves
between side panels [14] and [15] to form the base of the drawer.
Screw on the back panel [16] using 4x screws (F). Attach 1x slide rail (I)
to panel [14] and 1x slide rail (K) to panel [15] using 4x screws (E).
Tighten with a screwdriver.
Drawer x1
17
14
15
13
14
15
B
B
B
C
C
14
15
F F
F
F
16
14
15
13
I
K
E
E
E
13
E
O
Kennedy Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
